The following is a description of the Courses. A general description is offered, followed by the official description as per the ISO specifications. These courses have been prepared in order to comply with ISO 18436.2:2002 and in accordance with American Society for Nondestructive Testing (ASNT)
The Vibration Technician course is designed for the person who is responsible for collecting vibration readings in the field. This person needs to understand why they are collecting these readings; understand how vibration can indicate that a fault condition exists; and how to correctly measure the vibration. They must be able to download and upload the route, follow the route, record field observations, recognize when the test must be repeated, and understand what is required in order to do their job properly.
With the correct training, the Vibration Technician will take pride in their job and ensure that time spent out at the machine is put to best use.
Official description:
Individuals Vibration Technicians may be authorized by their employers to carry out single channel machinery vibration measurements. They shall not be responsible for the choice of sensor, vibration analyzer or analysis method to be used, nor for the assessment of the test results. They shall be qualified to:
- Operate portable data collectors and pre-assigned routes.
- Acquire readings from permanently installed instrumentation.
- Input results into a database and download routes from a computer.
- Conduct testing under steady-state operating conditions following predefined procedures.
- Recognize when no signal is present.
- Compare overall value vibration measurements against pre-established alert settings.
Topics covered
The following is a list of the main topics covered in the Vibration Technician I courses. Some topics are listed as being covered in two or all three of the courses.
Note: In a number of cases, we have selected to cover topics in lower levels (i.e. Category II instead of only Category III) to ensure that participants are learning all they should to perform their job successfully.
| No | Time | Description |
| 1 | Day 1 | 1. Principles of vibration
|
| 2 | Day 2 |
2. Data acquisition
3. Workshop |
| 3 | Day 3 |
4. Fault analysis
|
Adviser : Raymond Amir, Agus Sugiana, Haitham
Date : 5, 6, 7 Desember 2011
Place : Wisma Tamu Puspiptek, Serpong
Price : Rp 3.500.000,00-
For more information call us at
Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 Indonesia
Phone : 021 86615600, 8611131, Fax: 021-86115601
Mobile Phone : 081399291909
Email : vibrasindo@gmail.com
Registration Form
Step One PROVIDE CONTACT INFORMATION
Step Two TRANSFER PAYMENT
BNI SYARIAH CAB. RAWAMANGUN - JAKARTA TIMUR ACCOUNT NUMBER: 235731466 AN. PT VIBRASINDO
Step Three REPLY TO US
Fax or Email us your registration form with slip transfer of payment.
Thank you for your participation in this seminar organised by PT.VIBRASINDO
REPLY TO: PT. VIBRASINDO– JAKARTA
FAX: 021-8611207 OR EMAIL: vibrasindo@gmail.com
