CALL   021 29563051
WHATSAPP   0812 1274 1554
WHATSAPP   0857 4065 2657


provide professional services in the diagnosis and monitoring system with the totality of the machines and realialibility data



Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.


Anda juga bisa memesan via telephone. Silakan hubungi sales consultant, Hotline kami di, 021 29563051 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat

  • racking filter type balancer also available as a stroboscopic balancer 
  • without a photo sensor.
  • Equipped with a FFT function and an automatic sampling function as afrequency analyzer and printable on the built-in printer.
  • Balancer Model-7200A
  • Extension cable for the pickup 30 meters long (with a cable drum)
  • Electro-dynamic pickup (selectable from S2037F-100, B9200, I-544)
  • Carrying bag
  • Stroboscope
  • Reflective type photosensor (optional)


Applicable vibration pickup  

electro-dynamic vibration velocity pickup
(Three types of pickup below are selectable by a trim switch.)

  • MODEL-2009

    Sensitivity;10mV/mm/sInput impedance;10kΩ

  • B-9200
  •   Sensitivity;19.7mV/mm/sInput impedance;10kΩ
  • I-544
  •   Sensitivity;2.5mV/mm/sInput impedance;1MΩ
    Vibration pickup input   Channel A or Channel B (selectable)
    Rotational signal input  

    0~5V rise-up signal of 1 pulse per revolution
    For indication of revolution and phase reference of the tracking filter

    AC OUT   Vibration waveform output ±2V/FS Output impedance 100Ω
    Stroboscope output   for the attached stroboscope (turned on and off by a switch)
    Display   Digital LED display and indicators
    • r.p.m. Indication / 500-10,000rpm Resolution 1rpm
    • Indication of FIL OUT vibration value / Overall vibration value
    • Indication of FIL IN vibration value / Filter pass value in Tracking or Man. Tune mode
    • Phase angle indication / 0 to 359 degrees angle between the rise of a revolution pulse and a positive peak of the vibration waveform of the component of revolution
    • LOCK indicator:Lights when the balancer is in synchronism with the revolution signal or the internal oscillator.
    • INPUT SEL indicator / Shows an input channel that is under measurement
    • Unit indicator:Lights to indicate an acceleration, velocity, or displacement
    Analog meter   0-1 scale over 0-3 scale
  • FIL IN mode
  •   Shows the filter pass value in the Tracking or Man.Tune mode
  • FIL OUT mode
  •   Shows an overall vibration value
    Printer   A built-in thermal printer
  •   Prints out the result of current measurement at any timing

    Captures vibration waveforms, performs FFT on them,
    and prints out the resulting graph and a list of up to five peaks.


    Prints out the result of measurement of a selected channel
    under the specified conditions.

    Range of vibration measuring frequency   10Hz~200Hz(±0.5dB)
    Full scale range (10 dB step)    
  • Displacement
  •   1, 3.16, 10, 31.6, 100 ×1/100mm(P-P)FS
  • Velocity
  •   1, 3.16, 10, 31.6, 100 mm/s (Peak) Full scale
  • Acceleration
  •   1, 3.16, 10, 31.6 ,100 m/s2(Peak) Full scale
    Stroboscopic balancer function

    Flashes at a vibration phase filtered with a frequency of theinternal oscillator as the central frequency. (500-10,000rpm)

    Automatic capture and print function  

    Automatically captures vibration data according to OR of an r.p.m. change pitch and a time lapse pitch and prints out it together with time data.

    Tracking filter function   Automatic tuning with the signal from the revolution sensor by the tracking filter
    Power supply   AC100V±10V, Normally 1A or less, 2A fuse
    Dimensions and weight   (W)300×(H)123×(D)230mm,4.5kg